The stuffs needed:
-veraboard
-about 2 meters of wire
-2 X LED connectors
-2 X 1K ohm resistors
-1 X 100 ohm resistor
-1 X 1N4007 diode
-2 X super bright LED (white color recommended)
-1 X 16V 6800uF capacitor
-1 X 12V 5-pin relay
Connection:
1- Door - ; to be connected to door switch.
2- Fused constant +12V supply; to be connected to any fused +12V supply that is still available even when the key is switched off.
3- Ignition - ; to be connected to any screw that has direct contact with car body.
4- Ignition + ; to be connected to any supply that will only provide +12V supply when the key is switched on. Radio ACC wire is recommened.
5- LED 1 - ; to be connected to - terminal of LED 1.
6- LED 2 - ; to be connected to - terminal of LED 2.
7- LED 1 and 2 + ; to be connected to + terminal of LED 1 and 2.
wiring diagram
veraboard
dah siap
Tiada ulasan:
Catat Ulasan